MCGILL MR-60-SS CAGEROL GUIDEROL BEARINGS
MCGILL MR-60-SS Description
| McGILL NUMBER outer ring & roller assy. | S SHAFT DIA. | D* | W | H | R | HSG. BORE DIA. | STATIC LOAD RATING (LBS.) | BASIC DYNAMIC RATING (LBS.) | |||||
| +.0000 | TOL. | +.0000 | TOL. | +.000 -.005 | HOLE DIA. | MAX. FILLET FOR HOUSING | ROTATING HOUSING | TOL. +.0000 | STATIONARY HOUSING | TOL. +.0000 | |||
| MR-10-SS | .6250 |
-.0005 | 1.1250 |
-.0005 | 1.000 | 5/64 | .025 | 1.1247 |
-.0007 | 1.1257 |
-.0007 | 4300 | 4320 |
| MR-12-SS | .7500 | 1.2500 | 1.000 | 5/64 | .040 | 1.2497 | 1.2507 | 5400 | 4990 | ||||
| MR-14-SS | .8750 | 1.3750 | 1.000 | 5/64 | .040 | 1.3747 | 1.3757 | 6000 | 5280 | ||||
| MR-16-SS | 1.0000 | 1.5000 | 1.000 | 5/64 | .040 | 1.4997 | 1.5007 | 7100 | 5840 | ||||
| MR-18-SS | 1.1250 | 1.6250 | 1.250 | 3/32 | .040 | 1.6247 | 1.6257 | 12200 | 8720 | ||||
| MR-20-SS | 1.2500 | 1.7500 | 1.250 | 3/32 | .040 | 1.7497 | 1.7507 | 13100 | 9020 | ||||
| MR-22-SS | 1.3750 | 1.8750 | 1.250 | 3/32 | .040 | 1.8747 | 1.8757 | 14700 | 9640 | ||||
| MR-24-SS | 1.5000 | 2.0625 |
-.0006 | 1.250 | 3/32 | .060 | 2.0621 | 2.0632 | 15500 | 10300 | |||
| MR-26-SS | 1.6250 | 2.1875 | 1.250 | 3/32 | .060 | 2.1871 | 2.1882 | 16400 | 10600 | ||||
| MR-28-SS | 1.7500 | 2.3125 | 1.250 | 3/32 | .060 | 2.3121 | 2.3132 | 18100 | 11200 | ||||
| MR-30-SS | 1.8750 | 2.4375 | 1.250 | 3/32 | .060 | 2.4371 | 2.4382 | 19000 | 11400 | ||||
| MR-32-SS | 2.0000 | 2.5625 | 1.250 | 3/32 | .060 | 2.5621 | 2.5632 | 20700 | 12000 | ||||
| MR-36-SS | 2.2500 | 3.0000 | 1.750 | 1/8 | .060 | 2.9996 | 3.0007 | 39100 | 22400 | ||||
| MR-40-SS | 2.5000 | 3.2500 | 1.750 | 1/8 | .080 | 3.2496 | 3.2507 | 42900 | 23400 | ||||
| MR-44-SS | 2.7500 | 3.5000 |
-.0008 | 1.750 | 1/8 | .080 | 3.4995 |
-.0010 | 3.5008 |
-.0010 | 46700 | 24500 | |
| MR-48-SS | 3.0000 | 3.7500 | 1.750 | 1/8 | .080 | 3.7495 | 3.7508 | 52300 | 26100 | ||||
| †MR-52-SS | 3.2500 | 4.2500 | 1.750 | 3/16 | .080 | 4.2495 | 4.2508 | 54300 | 25100 | ||||
| MR-56-SS | 3.5000 | 4.5000 | 2.000 | 3/16 | .080 | 4.4995 | 4.5008 | 71600 | 31300 | ||||
| †MR-60-SS | 3.7500 | 4.7500 | 2.000 | 3/16 | .100 | 4.7495 | 4.7508 | 74700 | 31600 | ||||
| †MR-64-SS | 4.0000 | -.0007 | 5.0000 | -.0010 | 2.000 | 3/16 | .100 | 4.9999 | -.0015 | 5.0011 | -.0015 | 80400 | 32800 |
| †MR-68-SS | 4.2500 | 5.2500 | 2.000 | 3/16 | .100 | 5.2499 | 5.2511 | 86200 | 34000 | ||||
Outer ring and roller assembly
without separable inner ring
Available in 5 seal combinations (see page 69 also)
The outer ring and roller assemblies are for use without
inner rings on a ground shaft for which a minimum hard ness of 58 Rockwell “C” scale is recommended. The suffix
“SS” indicates double seals with lips turned in (illustrated
at right). This construction is most common and is intended
primarily for lubrication retention. For other seal combina tions, see page 69.
MCGILL MR-60-SS Nots
These sizes are not available from stock. Consult McGill Customer Service for availability.
This dimension may be slightly oversize due to seal press fit.
