IKO WS 85110,GS 85110 THRUST BEARINGS
IKO WS 85110,GS 85110 Description
| Shaft dia.
mm | Identification number | ||||||||||
| Thrust needle roller bearing | Mass (Ref.) g | Thrust | washer | Mass (Ref.) g | Inner | ring | Outer ring | Mass (Ref.) g | |||
| 10 | NTB | 1024 | 3.3 | AS | 1024 | 2.9 | WS | 1024 | GS | 1024 | 8 |
| 12 | NTB | 1226 | 3.8 | AS | 1226 | 3.2 | WS | 1226 | GS | 1226 | 8.9 |
| 15 | NTB | 1528 | 4.1 | AS | 1528 | 3.4 | WS | 1528 | GS | 1528 | 9.3 |
| 16 | NTB | 1629 | 4.3 | AS | 1629 | 3.6 | WS | 1629 | GS | 1629 | 9.8 |
| 17 | NTB | 1730 | 4.5 | AS | 1730 | 3.7 | WS | 1730 | GS | 1730 | 10.2 |
| 18 | NTB | 1831 | 4.7 | AS | 1831 | 3.9 | WS | 1831 | GS | 1831 | 10.7 |
| 20 | NTB | 2035 | 6.1 | AS | 2035 | 5 | WS | 2035 | GS | 2035 | 13.8 |
| 25 | NTB | 2542 | 8.2 | AS | 2542 | 6.9 | WS | 2542 | GS | 2542 | 21 |
| 30 | NTB | 3047 | 9.4 | AS | 3047 | 7.9 | WS | 3047 | GS | 3047 | 24 |
| 35 | NTB | 3552 | 10.6 | AS | 3552 | 8.9 | WS | 3552 | GS | 3552 | 31.5 |
| 40 | NTB 40603 | 22 | AS | 4060 | 12.1 | WS | 4060 | GS | 4060 | 42.5 | |
| 45 | NTB | 4565 | 24.5 | AS | 4565 | 13.3 | WS | 4565 | GS | 4565 | 53.5 |
| 50 | NTB | 5070 | 26.5 | AS | 5070 | 14.5 | WS | 5070 | GS | 5070 | 58.5 |
| 55 | NTB | 5578 | 33.5 | AS | 5578 | 18.5 | WS | 5578 | GS | 5578 | 93 |
| 60 | NTB | 6085 | 38.5 | AS | 6085 | 22 | WS | 6085 | GS | 6085 | 105 |
| 65 | NTB | 6590 | 41.5 | AS | 6590 | 23.5 | WS | 6590 | GS | 6590 | 124 |
| 70 | NTB | 7095 | 61 | AS | 7095 | 25 | WS | 7095 | GS | 7095 | 132 |
| 75 | NTB 75100 | 65 | AS 75100 | 26.5 | WS 75100 | GS 75100 | 153 | ||||
| 80 | NTB 80105 | 68.5 | AS 80105 | 28 | WS 80105 | GS 80105 | 162 | ||||
| 85 | NTB 85110 | 72 | AS 85110 | 29.5 | WS 85110 | GS 85110 | 170 | ||||
| Boundary dimensions mm | Basic dynamic load rating C N | Basic static load rating C0 N | Allowable rotational speed(2)
min-1 | |||||||
| d | D | Dw | s | B | (1) rs min | Ci | Ce | |||
| 10 | 24 | 2 | 1 | 2.75 | 0.3 | 14 | 22 | 7 820 | 23 900 | 15 000 |
| 12 | 26 | 2 | 1 | 2.75 | 0.3 | 16 | 24 | 8 340 | 26 900 | 13 000 |
| 15 | 28 | 2 | 1 | 2.75 | 0.3 | 18 | 26 | 8 830 | 29 900 | 12 000 |
| 16 | 29 | 2 | 1 | 2.75 | 0.3 | 19 | 27 | 9 070 | 31 400 | 11 000 |
| 17 | 30 | 2 | 1 | 2.75 | 0.3 | 20 | 28 | 9 320 | 32 900 | 11 000 |
| 18 | 31 | 2 | 1 | 2.75 | 0.3 | 21 | 29 | 9 550 | 34 400 | 10 000 |
| 20 | 35 | 2 | 1 | 2.75 | 0.3 | 23 | 33 | 11 700 | 46 500 | 9 000 |
| 25 | 42 | 2 | 1 | 3 | 0.6 | 29 | 40 | 14 400 | 64 700 | 7 500 |
| 30 | 47 | 2 | 1 | 3 | 0.6 | 34 | 45 | 15 400 | 73 300 | 6 500 |
| 35 | 52 | 2 | 1 | 3.5 | 0.6 | 39 | 50 | 16 300 | 81 900 | 5 500 |
| 40 | 60 | 3 | 1 | 3.5 | 0.6 | 45 | 57 | 24 200 | 108 000 | 5 000 |
| 45 | 65 | 3 | 1 | 4 | 0.6 | 50 | 62 | 25 900 | 121 000 | 4 500 |
| 50 | 70 | 3 | 1 | 4 | 0.6 | 55 | 67 | 27 600 | 135 000 | 4 000 |
| 55 | 78 | 3 | 1 | 5 | 0.6 | 61 | 75 | 32 400 | 171 000 | 4 000 |
| 60 | 85 | 3 | 1 | 4.75 | 1 | 66 | 82 | 38 200 | 219 000 | 3 500 |
| 65 | 90 | 3 | 1 | 5.25 | 1 | 71 | 87 | 40 100 | 237 000 | 3 000 |
| 70 | 95 | 4 | 1 | 5.25 | 1 | 75 | 91 | 47 400 | 244 000 | 3 000 |
| 75 | 100 | 4 | 1 | 5.75 | 1 | 80 | 96 | 48 400 | 256 000 | 3 000 |
| 80 | 105 | 4 | 1 | 5.75 | 1 | 85 | 101 | 49 500 | 267 000 | 2 500 |
| 85 | 110 | 4 | 1 | 5.75 | 1 | 90 | 106 | 50 300 | 279 000 | 2 500 |
IKO WS 85110,GS 85110 Nots
Notes(1) Minimum allowable value of chamfer dimension r
(2) Allowable rotational speed applies to oil lubrication. For grease lubrication, a maximum of 25% of this value is allowable.
