IKO TLA 2220 UU, TLA 2516 UU SHELL TYPE NEEDLE ROLLER BEARINGS
IKO TLA 2220 UU, TLA 2516 UU Description
| Shaft dia. mm |
Identification number | Mass (Ref. )
g | Boundary dimensions mm | Standard mounting dimensions | mm | ||||
| Fw | D | C | Shaft dia. h6 | Housing bore dia. N7 | |||||
| 12 | TLA 1216 UU | 11.7 | 12 | 18 | 16 | 12.000 | 11.989 | 17.995 | 17.977 |
| 14 | TLA 1416 UU | 13.3 | 14 | 20 | 16 | 14.000 | 13.989 | 19.993 | 19.972 |
| 15 | TLA 1516 UU | 14 | 15 | 21 | 16 | 15.000 | 14.989 | 20.993 | 20.972 |
| 16 | TLA 1616 UU | 14.8 | 16 | 22 | 16 | 16.000 | 15.989 | 21.993 | 21.972 |
| 18 | TLA 1816 UU | 16.3 | 18 | 24 | 16 | 18.000 | 17.989 | 23.993 | 23.972 |
| 20 | TLA 2016 UU | 17.8 | 20 | 26 | 16 | 20.000 | 19.987 | 25.993 | 25.972 |
| TLA 2020 UU | 22.5 | 20 | 26 | 20 | |||||
| 22 | TLA 2216 UU | 19.4 | 22 | 28 | 16 | 22.000 | 21.987 | 27.993 | 27.972 |
| TLA 2220 UU | 25 | 22 | 28 | 20 | |||||
| 25 | TLA 2516 UU | 26 | 25 | 32 | 16 | 25.000 | 24.987 | 31.992 | 31.967 |
| TLA 2520 UU | 33 | 25 | 32 | 20 | |||||
| 28 | TLA 2820 UU | 36.5 | 28 | 35 | 20 | 28.000 | 27.987 | 34.992 | 34.967 |
| 30 | TLA 3016 UU | 30.5 | 30 | 37 | 16 | 30.000 | 29.987 | 36.992 | 36.967 |
| TLA 3020 UU | 39 | 30 | 37 | 20 | |||||
| 35 | TLA 3516 UU | 35 | 35 | 42 | 16 | 35.000 | 34.984 | 41.992 | 41.967 |
| TLA 3520 UU | 45 | 35 | 42 | 20 | |||||
| 40 | TLA 4016 UU | 39.5 | 40 | 47 | 16 | 40.000 | 39.984 | 46.992 | 46.967 |
| TLA 4020 UU | 50.5 | 40 | 47 | 20 | |||||
| 45 | TLA 4520 UU | 56 | 45 | 52 | 20 | 45.000 | 44.984 | 51.991 | 51.961 |
| 50 | TLA 5026 UU | 89 | 50 | 58 | 26 | 50.000 | 49.984 | 57.991 | 57.961 |
| Basic dynamic load rating C N | Basic static load rating C0 N | Allowable rotational speed(1)
min-1 |
| 6 420 | 7 490 | 14 000 |
| 7 080 | 8 840 | 12 000 |
| 7 380 | 9 520 | 11 000 |
| 7 670 | 10 200 | 11 000 |
| 8 230 | 11 500 | 9 000 |
| 8 740 | 12 900 | 9 000 |
| 11 100 | 17 500 | 9 000 |
| 9 230 | 14 300 | 8 000 |
| 11 700 | 19 300 | 8 000 |
| 9 440 | 13 900 | 7 000 |
| 12 800 | 20 500 | 7 000 |
| 13 800 | 23 500 | 6 000 |
| 10 400 | 16 600 | 5 500 |
| 14 100 | 24 500 | 5 500 |
| 11 600 | 20 000 | 5 000 |
| 15 700 | 29 600 | 5 000 |
| 12 400 | 22 800 | 4 500 |
| 16 700 | 33 700 | 4 500 |
| 17 800 | 37 800 | 4 000 |
| 28 800 | 64 100 | 3 500 |
IKO TLA 2220 UU, TLA 2516 UU Nots
Note(1) Allowable rotational speed applies to oil lubrication. For grease lubrication, a maximum of 60% of this value is allowable.
Remarks1. ”W” in the identification number indicates that rolling elements are arranged in double rows.
2. Shell Type Grease Retained Full Complement Needle Roller Bearings are provided with prepacked grease. Standard type and
closed end type bearings are not provided with prepacked grease, so perform proper lubrication when using these types of
bearings.
