IKO TAF 101712/SG,TAF 101716/SG C-LUBE MACHINED TYPE NEEDLE ROLLER BEARINGS
IKO TAF 101712/SG,TAF 101716/SG Description
|
Shaft dia. |
Identification number | Mass (Ref.)
g | Boundary dimensions mm | Standard mounting dimension Da Max. mm | Basic dynamic load rating C
N | Basic static load rating C0
N | |||
| Fw | D | C | rs min(1) | ||||||
| 10 | TAF 101712/SG | 11 | 10 | 17 | 12 | 0.2 | 15.4 | 5 880 | 5 970 |
| TAF 101716/SG | 14.7 | 10 | 17 | 16 | 0.2 | 15.4 | 8 230 | 9 190 | |
| 12 | TAF 121912/SG | 12.5 | 12 | 19 | 12 | 0.3 | 17 | 6 610 | 7 260 |
| TAF 121916/SG | 16.8 | 12 | 19 | 16 | 0.3 | 17 | 9 250 | 11 200 | |
| 14 | TAF 142216/SG | 22 | 14 | 22 | 16 | 0.3 | 20 | 11 700 | 13 700 |
| TAF 142220/SG | 27.5 | 14 | 22 | 20 | 0.3 | 20 | 14 800 | 18 600 | |
| 15 | TAF 152316/SG | 23.5 | 15 | 23 | 16 | 0.3 | 21 | 12 300 | 14 900 |
| TAF 152320/SG | 29 | 15 | 23 | 20 | 0.3 | 21 | 15 600 | 20 200 | |
| 16 | TAF 162416/SG | 24 | 16 | 24 | 16 | 0.3 | 22 | 12 300 | 15 100 |
| TAF 162420/SG | 30 | 16 | 24 | 20 | 0.3 | 22 | 15 500 | 20 400 | |
| 18 | TAF 182616/SG | 26.5 | 18 | 26 | 16 | 0.3 | 24 | 13 400 | 17 500 |
| TAF 182620/SG | 33 | 18 | 26 | 20 | 0.3 | 24 | 17 000 | 23 600 | |
| 19 | TAF 192716/SG | 28 | 19 | 27 | 16 | 0.3 | 25 | 14 000 | 18 700 |
| TAF 192720/SG | 35.5 | 19 | 27 | 20 | 0.3 | 25 | 17 700 | 25 300 | |
| 20 | TAF 202816/SG | 28.5 | 20 | 28 | 16 | 0.3 | 26 | 13 900 | 18 800 |
| TAF 202820/SG | 37 | 20 | 28 | 20 | 0.3 | 26 | 17 600 | 25 400 | |
| 21 | TAF 212916/SG | 30 | 21 | 29 | 16 | 0.3 | 27 | 14 400 | 20 000 |
| TAF 212920/SG | 37.5 | 21 | 29 | 20 | 0.3 | 27 | 18 200 | 27 100 | |
| 22 | TAF 223016/SG | 31 | 22 | 30 | 16 | 0.3 | 28 | 14 900 | 21 200 |
| TAF 223020/SG | 39 | 22 | 30 | 20 | 0.3 | 28 | 18 900 | 28 700 | |
| 24 | TAF 243216/SG | 33 | 24 | 32 | 16 | 0.3 | 30 | 15 300 | 22 500 |
| TAF 243220/SG | 42 | 24 | 32 | 20 | 0.3 | 30 | 19 400 | 30 500 | |
| 25 | TAF 253316/SG | 35 | 25 | 33 | 16 | 0.3 | 31 | 15 800 | 23 700 |
| TAF 253320/SG | 43.5 | 25 | 33 | 20 | 0.3 | 31 | 20 000 | 32 100 | |
|
Shaft dia. |
Identification number | Mass (Ref.)
g | Boundary dimensions mm | Standard mounting dimension Da Max. mm | Basic dynamic load rating C
N | Basic static load rating C0
N | |||
| Fw | D | C | rs min(1) | ||||||
| 29 | TAF 293820/SG | 59 | 29 | 38 | 20 | 0.3 | 36 | 21 600 | 37 200 |
| TAF 293830/SG | 88 | 29 | 38 | 30 | 0.3 | 36 | 30 900 | 59 100 | |
| 30 | TAF 304020/SG | 67 | 30 | 40 | 20 | 0.3 | 38 | 25 100 | 40 100 |
| TAF 304030/SG | 101 | 30 | 40 | 30 | 0.3 | 38 | 36 000 | 63 900 | |
| 35 | TAF 354520/SG | 76.5 | 35 | 45 | 20 | 0.3 | 43 | 26 900 | 46 200 |
| TAF 354530/SG | 116.5 | 35 | 45 | 30 | 0.3 | 43 | 38 600 | 73 600 | |
| 40 | TAF 405020/SG | 86 | 40 | 50 | 20 | 0.3 | 48 | 29 400 | 54 100 |
| TAF 405030/SG | 130 | 40 | 50 | 30 | 0.3 | 48 | 42 300 | 86 200 | |
| 45 | TAF 455520/SG TAF 455530/SG | 95.5 144 | 45 45 | 55 55 | 20 30 | 0.3 0.3 | 53 53 | 31 000 44 600 | 60 200 95 800 |
IKO TAF 101712/SG,TAF 101716/SG Nots
Note(1) Minimum allowable value of chamfer dimension r.
Remarks1. Models with a nominal roller set bore diameter Fw of 26mm or less are provided without oil holes. other models are provided with
one oil hole and oil groove.
2. This bearing can not be re-lubricated as thermosetting solid-type lubricant C-Lube fills inner space of the bearing.
Related products
IKO TAF 243220/SG,TAF 243216/SG C-LUBE MACHINED TYPE NEEDLE ROLLER BEARINGS
IKO TAF 253320/SG,TAF 253316/SG C-LUBE MACHINED TYPE NEEDLE ROLLER BEARINGS
IKO TAF 223020/SG,TAF 223016/SG C-LUBE MACHINED TYPE NEEDLE ROLLER BEARINGS
IKO TAF 304020/SG,TAF 304030/SG C-LUBE MACHINED TYPE NEEDLE ROLLER BEARINGS
