IKO NAS 5013UUNR,NAS 5013ZZNR ROLLER BEARINGS
IKO NAS 5013UUNR,NAS 5013ZZNR Description
|
Shaft dia. mm | Identification number | Mass (Ref.)
kg | Boundary dimensions mm | |||||||
| Sealed type | Shield type | d | D | D2 | B | C | C1 | S | ||
| 40 | NAS 5008UUNR | NAS 5008ZZNR | 0.55 | 40 | 68 | 71.8 | 38 | 37 | 28 | 4.5 |
| 45 | NAS 5009UUNR | NAS 5009ZZNR | 0.70 | 45 | 75 | 78.8 | 40 | 39 | 30 | 4.5 |
| 50 | NAS 5010UUNR | NAS 5010ZZNR | 0.75 | 50 | 80 | 83.8 | 40 | 39 | 30 | 4.5 |
| 55 | NAS 5011UUNR | NAS 5011ZZNR | 1.15 | 55 | 90 | 94.8 | 46 | 45 | 34 | 5.5 |
| 60 | NAS 5012UUNR | NAS 5012ZZNR | 1.20 | 60 | 95 | 99.8 | 46 | 45 | 34 | 5.5 |
| 65 | NAS 5013UUNR | NAS 5013ZZNR | 1.30 | 65 | 100 | 104.8 | 46 | 45 | 34 | 5.5 |
| 70 | NAS 5014UUNR | NAS 5014ZZNR | 1.90 | 70 | 110 | 114.5 | 54 | 53 | 42 | 5.5 |
| 75 | NAS 5015UUNR | NAS 5015ZZNR | 2.00 | 75 | 115 | 119.5 | 54 | 53 | 42 | 5.5 |
| 80 | NAS 5016UUNR | NAS 5016ZZNR | 2.65 | 80 | 125 | 129.5 | 60 | 59 | 48 | 5.5 |
| 85 | NAS 5017UUNR | NAS 5017ZZNR | 2.80 | 85 | 130 | 134.5 | 60 | 59 | 48 | 5.5 |
| 90 | NAS 5018UUNR | NAS 5018ZZNR | 3.70 | 90 | 140 | 145.4 | 67 | 66 | 54 | 6 |
| 95 | NAS 5019UUNR | NAS 5019ZZNR | 3.90 | 95 | 145 | 150.4 | 67 | 66 | 54 | 6 |
| 100 | NAS 5020UUNR | NAS 5020ZZNR | 4.05 | 100 | 150 | 155.4 | 67 | 66 | 54 | 6 |
| 110 | NAS 5022UUNR | NAS 5022ZZNR | 6.50 | 110 | 170 | 175.4 | 80 | 79 | 65 | 7 |
| 120 | NAS 5024UUNR | NAS 5024ZZNR | 6.95 | 120 | 180 | 188.4 | 80 | 79 | 65 | 7 |
| 130 | NAS 5026UUNR | NAS 5026ZZNR | 10.5 | 130 | 200 | 208.4 | 95 | 94 | 77 | 8.5 |
| 140 | NAS 5028UUNR | NAS 5028ZZNR | 11.0 | 140 | 210 | 218.4 | 95 | 94 | 77 | 8.5 |
| 150 | NAS 5030UUNR | NAS 5030ZZNR | 13.5 | 150 | 225 | 233.4 | 100 | 99 | 81 | 9 |
| 160 | NAS 5032UUNR | NAS 5032ZZNR | 16.5 | 160 | 240 | 248.4 | 109 | 108 | 89 | 9.5 |
| 170 | NAS 5034UUNR | NAS 5034ZZNR | 22.5 | 170 | 260 | 270 | 122 | 121 | 99 | 11 |
| Basic dynamic load rating C N | Basic static load rating C0 N | Allowable rotational speed(2)
min-1 | ||||
| f | c | (1) rs min | J | |||
| 2 | 1.5 | 0.6 | 50 | 79 500 | 116 000 | 2 500 |
| 2 | 1.5 | 0.6 | 56 | 95 500 | 144 000 | 2 000 |
| 2 | 1.5 | 0.6 | 61 | 100 000 | 158 000 | 2 000 |
| 2.5 | 2 | 0.6 | 68 | 118 000 | 193 000 | 1 800 |
| 2.5 | 2 | 0.6 | 73 | 123 000 | 208 000 | 1 700 |
| 2.5 | 2 | 0.6 | 78 | 128 000 | 224 000 | 1 600 |
| 2.5 | 2 | 0.6 | 84 | 171 000 | 284 000 | 1 400 |
| 2.5 | 2 | 0.6 | 91 | 179 000 | 308 000 | 1 300 |
| 2.5 | 2 | 0.6 | 97 | 251 000 | 428 000 | 1 300 |
| 2.5 | 2 | 0.6 | 101 | 257 000 | 446 000 | 1 200 |
| 2.5 | 2.5 | 0.6 | 110 | 305 000 | 540 000 | 1 100 |
| 2.5 | 2.5 | 0.6 | 114 | 312 000 | 562 000 | 1 100 |
| 2.5 | 2.5 | 0.6 | 118 | 318 000 | 584 000 | 1 000 |
| 2.5 | 3 | 1 | 130 | 384 000 | 697 000 | 900 |
| 3 | 3 | 1 | 139.5 | 400 000 | 750 000 | 850 |
| 3 | 3 | 1 | 156 | 537 000 | 1 000 000 | 750 |
| 3 | 3 | 1 | 167 | 543 000 | 1 070 000 | 700 |
| 3 | 3.5 | 1 | 176.5 | 623 000 | 1 210 000 | 650 |
| 3 | 3.5 | 1.5 | 188.5 | 720 000 | 1 390 000 | 650 |
| 4 | 3.5 | 1.5 | 204.5 | 857 000 | 1 730 000 | 600 |
IKO NAS 5013UUNR,NAS 5013ZZNR Nots
Notes(1) Minimum allowable value of chamfer dimension r
(2) Allowable rotational speed applies to grease lubrication. Considering that the axial load acts under practical operating conditions,
up to 1/10 of this value is recommended for actual use.
Remarks1. The inner ring has an oil groove and two oil holes.
2. Roller Bearings for Sheaves are provided with prepacked grease.
