IKO MXL 25 C-Lube Linear Roller Way Super MX
IKO MXL 25 Description
|
Identification number |
Interchangeable | Mass (Ref.) | Dimensions of assembly
mm |
Dimensions of slide unit
mm |
Dimensions of track rail
mm |
Appended mounting bolt for track rail（2）
Bolt size×R |
Basic dynamic load rating（3）
C N |
Basic static load rating（3）
C0 N |
Static moment rating（3） | ||||||||||||||||||||||||
|
MX series |
LRX series （No C-Lube） |
Slide unit kg | Track rail kg/m |
H |
H1 |
N |
W2 |
W3 |
W4 |
L1 |
L2 |
L3 |
L4 |
d1 |
M1 |
H2 |
H3 |
H5 |
W |
H4 |
d3 |
d4 |
h |
E |
F |
T0
N・m |
TX
N・m |
TY
N・m |
|||||
| MXC 25 | LRXC 25 | ○ | 0.44 |
3.59 |
36 |
6 |
23.5 |
70 |
28.5 |
6.5 |
74 | － | 36 | 83 |
7 |
M 8 |
10 |
5 |
5 |
23 |
24.5 |
7 |
11 |
9 |
30 |
60 |
M6×25 |
21 600 | 33 800 | 500 | 213
1 810 |
213
1 810 |
|
| MX 25 | LRX 25 | ○ | 0.67 | 98 |
45 |
60 | 107 | 32 100 | 56 300 | 833 | 573
3 800 |
573
3 800 |
|||||||||||||||||||||
| MXG 25 | LRXG 25 | ○ | 0.84 | 113 | 75 | 122 | 38 200 | 70 300 | 1 040 | 885
5 380 |
885
5 380 |
||||||||||||||||||||||
| MXL 25 | － | － | 1.08 | 137 | 70 | 99 | 146 | 47 400 | 92 800 | 1 370 | 1 530
8 480 |
1 530
8 480 |
|||||||||||||||||||||
| MXC 30 | LRXC 30 | ○ | 0.78 |
5.01 |
42 |
6.5 |
31 |
90 |
36 |
9 |
85 | － | 42.4 | 95 |
8.5 |
M10 |
10 |
6.5 |
5.5 |
28 |
28 |
9 |
14 |
12 |
40 |
80 |
M8×28 |
29 200 | 44 600 | 808 | 329
2 740 |
329
2 740 |
|
| MX 30 | LRX 30 | ○ | 1.20 | 113 |
52 |
70.4 | 123 | 43 400 | 74 400 | 1 350 | 883
5 780 |
883
5 780 |
|||||||||||||||||||||
| MXG 30 | LRXG 30 | ○ | 1.58 | 134 | 91.4 | 144 | 53 200 | 96 700 | 1 750 | 1 470
8 740 |
1 470
8 740 |
||||||||||||||||||||||
| MXL 30 | － | － | 2.03 | 162 | 80 | 119.4 | 172 | 65 600 | 126 000 | 2 290 | 2 500
13 600 |
2 500
13 600 |
|||||||||||||||||||||
IKO MXL 25 Nots
Notes （1） Track rail lengths L are shown in Table 2.1 on page Ⅱ－175 and Table 2.3 on page Ⅱ－176 .
（2） The appended track rail mounting bolts are hexagon socket head bolts equivalent to JIS B 1176. In an assembled set of MX series,
track rail mounting bolts are not appended.
（3） The direction of basic dynamic load rating (C), basic static load rating (C0), and static moment rating (T0, TX, TY) are shown in the
sketches below. The upper values of TX and TY are for one slide unit and the lower values are for two slide units in close contact.
（4） The shapes of grease nipple vary by size. The specifications are shown in Table 15 on page Ⅱ－188.
Remark: A grease nipple mounting thread hole is provided on the right and left end plates respectively.
IKO MXL 25 Example of identification number of assembled set
