MCGILL CCFH-3/4-SB,CCFH-7/8-SB CAMROL CAM FOLLOWER BEARINGS CCFH-SB SERIES HEAVY STUD
MCGILL CCFH-3/4-SB,CCFH-7/8-SB Description
|
BRG. NO. |
ROLLER DIA. (RD)
+.000 -.001 |
ROLLER WIDTH (W)
+.000 -.005 |
STUD DIA. (SD)
+.001 -.000 |
STUD L’GTH. (SL) |
MIN. THR’D L’GTH. (TL) |
FINE THR’DS. |
OIL HOLE | LUB. FIT- TING SIZE (F) |
MIN. BOSS DIA. |
HOUSING BORE DIA.
+.0002 -.0003 |
*RECOM. CLAMPING TORQUE LBS.-IN. |
MAX. STATIC CAPACITY LBS. |
BASIC DYN. RATING LBS. |
|
| HOLE CENTER (HC) | HOLE DIA. (HD) | |||||||||||||
| CCFH-1/2-SB | .500 | .375 | .250 | 5/8 | 1/4 | 1/4-28 | – | – | – | 13/32 | .2503 | 35 | 1580 | 680 |
| CCFH-9/16-SB | .5625 | .375 | .250 | 5/8 | 1/4 | 1/4-28 | – | – | – | 13/32 | .2503 | 35 | 1580 | 680 |
| CCFH-5/8-SB | .625 | .4375 | .3125 | 3/4 | 5/16 | 5/16- 24 | – | – | – | 15/32 | .3128 | 90 | 2480 | 955 |
| CCFH-11/16-SB | .6875 | .4375 | .3125 | 3/4 | 5/16 | 5/16-24 | – | – | – | 15/32 | .3128 | 90 | 2480 | 955 |
| CCFH-3/4-SB | .750 | .500 | .4375 | 7/8 | 3/8 | 7/16-20 | 1/4 | 3/32 | 3/16 | 39/64 | .4378 | 250 | 4130 | 1660 |
| CCFH-7/8-SB | .875 | .500 | .4375 | 7/8 | 3/8 | 7/16-20 | 1/4 | 3/32 | 3/16 | 39/64 | .4378 | 250 | 4130 | 1660 |
| CCFH-1-SB | 1.000 | .625 | .625 | 1 | 1/2 | 5/8-18 | 1/4 | 3/32 | 3/16 | 25/32 | .6253 | 650 | 6120 | 2225 |
| CCFH-1 1/8-SB | 1.125 | .625 | .625 | 1 | 1/2 | 5/8-18 | 1/4 | 3/32 | 3/16 | 25/32 | .6253 | 650 | 6120 | 2225 |
| CCFH-1 1/4-SB | 1.250 | .750 | .750 | 1 1/4 | 5/8 | 3/4-16 | 5/16 | 3/32 | 3/16 | 63/64 | .7503 | 1250 | 8500 | 3930 |
| CCFH-1 3/8-SB | 1.375 | .750 | .750 | 1 1/4 | 5/8 | 3/4-16 | 5/16 | 3/32 | 3/16 | 63/64 | .7503 | 1250 | 8500 | 3930 |
| CCFH-1 1/2-SB | 1.500 | .875 | .875 | 1 1/2 | 3/4 | 7/8-14 | 3/8 | 3/32 | 3/16 | 1 3/32 | .8753 | 1500 | 11280 | 4840 |
| CCFH-1 5/8-SB | 1.625 | .875 | .875 | 1 1/2 | 3/4 | 7/8-14 | 3/8 | 3/32 | 3/16 | 1 3/32 | .8753 | 1500 | 11280 | 4840 |
| CCFH-1 3/4-SB | 1.750 | 1.000 | 1.000 | 1 3/4 | 7/8 | 1-14 | 7/16 | 3/32 | 3/16 | 1 1/4 | 1.0003 | 2250 | 15840 | 6385 |
| CCFH-1 7/8-SB | 1.875 | 1.000 | 1.000 | 1 3/4 | 7/8 | 1-14 | 7/16 | 3/32 | 3/16 | 1 1/4 | 1.0003 | 2250 | 15840 | 6385 |
| CCFH-2-SB | 2.000 | 1.250 | 1.125 | 2 | 1 | 1 1/8-12 | 1/2 | 1/8 | 3/16 | 1 13/32 | 1.1253 | 2800 | 21140 | 8090 |
| CCFH-2 1/4-SB | 2.250 | 1.250 | 1.125 | 2 | 1 | 1 1/8-12 | 1/2 | 1/8 | 3/16 | 1 13/32 | 1.1253 | 2800 | 21140 | 8090 |
| CCFH-2 1/2-SB | 2.500 | 1.500 | 1.250 | 2 1/4 | 1 1/8 | 1 1/4-12 | 9/16 | 1/8 | 3/16 | 1 11/16 | 1.2503 | 3450 | 32900 | 11720 |
| CCFH-2 3/4-SB | 2.750 | 1.500 | 1.250 | 2 1/4 | 1 1/8 | 1 1/4-12 | 9/16 | 1/8 | 3/16 | 1 11/16 | 1.2503 | 3450 | 32900 | 11720 |
| CCFH-3-SB | 3.000 | 1.750 | 1.500 | 2 1/2 | 1 1/4 | 1 1/2-12 | 5/8 | 1/8 | â?1/4 | 2 1/8 | 1.5003 | 5000 | 49820 | 15720 |
| CCFH-3 1/4-SB | 3.250 | 1.750 | 1.500 | 2 1/2 | 1 1/4 | 1 1/2-12 | 5/8 | 1/8 | â?1/4 | 2 1/8 | 1.5003 | 5000 | 49820 | 15720 |
| CCFH-3 1/2-SB | 3.500 | 2.000 | 1.750 | 2 3/4 | 1 3/8 | 1 3/4-12 | 11/16 | 1/8 | â?1/4 | 2 7/16 | 1.7503 | 5000 | 63250 | 22800 |
| CCFH-4-SB | 4.000 | 2.250 | 2.000 | 3 1/2 | 1 1/2 | 2-12 | 3/4 | 1/8 | â?1/4 | 2 51/64 | 2.0003 | 5000 | 89540 | 29985 |
Cam followers with crowned O.D.s, hex holes and LUBRI-DISC® seals
See page 15 for hex
wrench sizes.
See page 14 for
crown details.
MCGILL CCFH-3/4-SB,CCFH-7/8-SB Nots
Not available from stock. Consult McGill Customer Service for availability.
Coarse Thread.
Oil hole (F) drilled from the flange end of the stud to the radial oil hole only.
Clamping torque is based on dry threads. If threads are lubricated, use half of values shown.
Related products
-
MCGILL CCFH-1-SB,CCFH-1 1/8-SB CAMROL CAM FOLLOWER BEARINGS CCFH-SB SERIES HEAVY STUD
-
MCGILL CCFH-6-S,CCFH-7-S GENERAL ENGINEERING SECTION CCFH-S SERIES HEAVY STUD
-
MCGILL CCFH-1-S,CCFH-1 1/8-S GENERAL ENGINEERING SECTION CCFH-S SERIES HEAVY STUD
-
MCGILL CCFH-2 1/4-SB,CCFH-2 1/2-SB CAMROL CAM FOLLOWER BEARINGS CCFH-SB SERIES HEAVY STUD
