MCGILL CCF-3 1/2-S,CCF-4-S CAMROL CAM FOLLOWER BEARINGS CCF-S SERIES
MCGILL CCF-3 1/2-S,CCF-4-S Description
| Â
 BRG. NO. |
ROLLER DIA. (RD)
+.000 -.001 |
ROLLER WIDTH (W)
+.000 -.005 |
STUD DIA. (SD)
+.001 -.000 |
Â
STUD L’GTH. (SL) |
Â
MIN. THR’D L’GTH. (TL) |
Â
 FINE THR’DS. |
OIL HOLE | LUB. FIT- TING SIZE
(F)* |
Â
MIN. BOSS DIA. |
HOUSING BORE DIA.
+.0002 -.0003 |
***RECOM. CLAMPING TORQUE LBS.-
IN. |
Â
MAX. STATIC CAPACITY LBS. |
Â
BASIC DYN. RATING LBS. |
|
| HOLE CENTER (HC) | HOLE DIA. (HD) | |||||||||||||
| CCF-1/2-N-S | .500 | .344 | .190 | 1/2 | 1/4 | 10-32 | – | – | 1/8* | 19/64 | .1903 | 15 | 720 | 620 |
| CCF-1/2-S | .500 | .375 | .190 | 5/8 | 1/4 | 10-32 | – | – | 1/8* | 19/64 | .1903 | 15 | 790 | 680 |
| CCF-9/16-S | .5625 | .375 | .190 | 5/8 | 1/4 | 10-32 | – | – | 1/8* | 19/64 | .1903 | 15 | 790 | 680 |
| CCF-5/8-N-S | .625 | .406 | .250 | 5/8 | 5/16 | 1/4-28 | – | – | 1/8* | 23/64 | .2503 | 35 | 1085 | 930 |
| CCF-5/8-S | .625 | .4375 | .250 | 3/4 | 5/16 | 1/4-28 | – | – | 1/8* | 23/64 | .2503 | 35 | 1215 | 955 |
| CCF-11/16-S | .6875 | .4375 | .250 | 3/4 | 5/16 | 1/4-28 | – | – | 1/8* | 23/64 | .2503 | 35 | 1215 | 955 |
| CCF-3/4-S | .750 | .500 | .375 | 7/8 | 3/8 | 3/8-24 | 1/4 | 3/32 | 3/16 | 1/2 | .3753 | 95 | 2065 | 1660 |
| CCF-7/8-S | .875 | .500 | .375 | 7/8 | 3/8 | 3/8-24 | 1/4 | 3/32 | 3/16 | 1/2 | .3753 | 95 | 2065 | 1660 |
| CCF-1-S | 1.000 | .625 | .4375 | 1 | 1/2 | 7/16-20 | 1/4 | 3/32 | 3/16 | 41/64 | .4378 | 250 | 3060 | 2225 |
| CCF-1 1/8-S | 1.125 | .625 | .4375 | 1 | 1/2 | 7/16-20 | 1/4 | 3/32 | 3/16 | 41/64 | .4378 | 250 | 3060 | 2225 |
| CCF-1 1/4-S | 1.250 | .750 | .500 | 1 1/4 | 5/8 | 1/2-20 | 5/16 | 3/32 | 3/16 | 49/64 | .5003 | 350 | 4250 | 3930 |
| CCF-1 3/8-S | 1.375 | .750 | .500 | 1 1/4 | 5/8 | 1/2-20 | 5/16 | 3/32 | 3/16 | 49/64 | .5003 | 350 | 4250 | 3930 |
| CCF-1 1/2-S | 1.500 | .875 | .625 | 1 1/2 | 3/4 | 5/8-18 | 3/8 | 3/32 | 3/16 | 57/64 | .6253 | 650 | 5640 | 4840 |
| CCF-1 5/8-S | 1.625 | .875 | .625 | 1 1/2 | 3/4 | 5/8-18 | 3/8 | 3/32 | 3/16 | 57/64 | .6253 | 650 | 5640 | 4840 |
| CCF-1 3/4-S | 1.750 | 1.000 | .750 | 1 3/4 | 7/8 | 3/4-16 | 7/16 | 3/32 | 3/16 | 1 3/64 | .7503 | 1250 | 7920 | 6385 |
| CCF-1 7/8-S | 1.875 | 1.000 | .750 | 1 3/4 | 7/8 | 3/4-16 | 7/16 | 3/32 | 3/16 | 1 3/64 | .7503 | 1250 | 7920 | 6385 |
| CCF-2-S | 2.000 | 1.250 | .875 | 2 | 1 | 7/8-14 | 1/2 | 1/8 | 3/16 | 1 13/64 | .8753 | 1500 | 10570 | 8090 |
| CCF-2 1/4-S | 2.250 | 1.250 | .875 | 2 | 1 | 7/8-14 | 1/2 | 1/8 | 3/16 | 1 13/64 | .8753 | 1500 | 10570 | 8090 |
| CCF-2 1/2-S | 2.500 | 1.500 | 1.000 | 2 1/4 | 1 1/8 | 1-14 | 9/16 | 1/8 | 3/16 | 1 5/16 | 1.0003 | 2250 | 16450 | 11720 |
| CCF-2 3/4-S | 2.750 | 1.500 | 1.000 | 2 1/4 | 1 1/8 | 1-14 | 9/16 | 1/8 | 3/16 | 1 5/16 | 1.0003 | 2250 | 16450 | 11720 |
| CCF-3-S | 3.000 | 1.750 | 1.250 | 2 1/2 | 1 1/4 | 1 1/4-12 | 5/8 | 1/8 | 1/4 | 1 3/4 | 1.2503 | 3450 | 24910 | 15720 |
| CCF-3 1/4-S | 3.250 | 1.750 | 1.250 | 2 1/2 | 1 1/4 | 1 1/4-12 | 5/8 | 1/8 | 1/4 | 1 3/4 | 1.2503 | 3450 | 24910 | 15720 |
| CCF-3 1/2-S | 3.500 | 2.000 | 1.375 | 2 3/4 | 1 3/8 | 1 3/8-12 | 11/16 | 1/8 | 1/4 | 1 59/64 | 1.3753 | 4200 | 31625 | 22800 |
| CCF-4-S | 4.000 | 2.250 | 1.500 | 3 1/2 | 1 1/2 | 1 1/2-12 | 3/4 | 1/8 | 1/4 | 2 9/32 | 1.5003 | 5000 | 44770 | 29985 |
| â CCF-5-S | 5.000 | 2.750 | 2.000 | 5 1/16 | 2 9/16 | 2-12 | 7/8 | 3/16 | 1/4 N.P.T. | 2 7/8 | 2.0003 | 5000 | 67950 | 46575 |
| â CCF-6-S | 6.000 | 3.250 | 2.500 | 6 | 3 | 2 1/2-12 | 1 | 3/16 | 1/4 N.P.T. | 3 3/8 | 2.5003 | 5000 | 80450 | 60000 |
| â CCF-7-S | 7.000 | 3.750 | 3.000 | 7 11/16 | 4 1/8 | 3-12 | 1 1/4 | 3/16 | 1/4 N.P.T. | 3 7/8 | 3.0003 | 5000 | 106930 | 75380 |
| â CCF-8-S â?/td> | 8.000 | 4.250** | 3.250 | 8 1/2 | 4 1/4 | 3 1/4-4 | – | – | 1/4 N.P.T.* | 4 3/4 | 3.2503 | 5000 | 144100 | 92200 |
| â CCF-9-S â?/td> | 9.000 | 4.750** | 3.750 | 9 1/2 | 4 3/4 | 3 1/2-4 | – | – | 1/4 N.P.T.* | 5 7/16 | 3.7503 | 5000 | 183430 | 113260 |
| â CCF-10-S â?/td> | 10.000 | 5.250** | 4.250 | 10 | 4 3/4 | 3 1/2-4 | – | – | 1/4 N.P.T.* | 5 59/64 | 4.2503 | 5000 | 215565 | 131545 |
Cam followers with crowned O.D.s and LUBRI-DISC® seals
See page 14 for crown details.
â?/16″ on CCF-5-S, CCF-6-S, CCF-7-S
MCGILL CCF-3 1/2-S,CCF-4-S Nots
Not available from stock. Consult McGill Customer Service for availability.
Standard tolerances do not apply. Consult McGill Customer Service.
Oil hole (F) drilled from the flange end of the stud to the radial oil hole only.
Flange extends 3/4″ beyond face of outer race, and endplate extends 1/8″ beyond face of outer race.
Clamping torque is based on dry threads. If threads are lubricated, use half of values shown.
Coarse threads
