IKO TAF 324220,TAF 324230 MACHINED TYPE NEEDLE ROLLER BEARINGS
IKO TAF 324220,TAF 324230 Description
| Shaft dia.
mm | Identification number | Mass (Ref.)
g | |||||
| RNA 49 | RNA 69 | RNA 48 | TAF | TR | GTR | ||
|
32 | ─ ─ RNA 49/28 ─ | ─ ─ ─ RNA 69/28 | ─ ─ ─ ─ | TAF 324220 TAF 324230 ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | 68 102 76.5 133 |
| ─ | ─ | ─ | ─ | ─ | GTR 324530 | 152 | |
|
35 | ─ ─ RNA 4906 ─ | ─ ─ ─ RNA 6906 | ─ ─ ─ ─ | TAF 354520 TAF 354530 ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | 73.5 112 72.5 125 |
| ─ ─ | ─ ─ | ─ ─ | ─ ─ | TR 354830 ─ | ─ GTR 354830 | 139 163 | |
| 37 | ─ ─ | ─ ─ | ─ ─ | TAF 374720 TAF 374730 | ─ ─ | ─ ─ | 77.5 117 |
| 38 | ─ ─ | ─ ─ | ─ ─ | TAF 384820 TAF 384830 | ─ ─ | ─ ─ | 79 119 |
| ─ ─ | ─ ─ | ─ ─ | ─ ─ | TR 385230 ─ | ─ GTR 385230 | 168 195 | |
|
40 | ─ ─ RNA 49/32 ─ | ─ ─ ─ RNA 69/32 | ─ ─ ─ ─ | TAF 405020 TAF 405030 ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | 83 125 96 172 |
| ─ ─ | ─ ─ | ─ ─ | ─ ─ | TR 405520 ─ | ─ GTR 405520 | 129 144 | |
| Boundary dimensions | mm | Standard mounting dimension Da Max. mm | Basic dynamic load rating C
N | Basic static load rating C0 N | Allowable rotational speed(2)
min-1 | ||
| Fw | D | C | (1) rs min | ||||
| 32 | 42 | 20 | 0.3 | 40 | 25 700 | 42 200 | 12 000 |
| 32 | 42 | 30 | 0.3 | 40 | 36 800 | 67 200 | 12 000 |
| 32 | 45 | 17 | 0.3 | 43 | 24 500 | 32 700 | 12 000 |
| 32 | 45 | 30 | 0.3 | 43 | 41 800 | 64 800 | 12 000 |
| 32 | 45 | 30 | 0.3 | 43 | 58 000 | 101 000 | 4 500 |
| 35 | 45 | 20 | 0.3 | 43 | 26 900 | 46 200 | 11 000 |
| 35 | 45 | 30 | 0.3 | 43 | 38 600 | 73 600 | 11 000 |
| 35 | 47 | 17 | 0.3 | 45 | 25 200 | 34 700 | 11 000 |
| 35 | 47 | 30 | 0.3 | 45 | 43 000 | 69 000 | 11 000 |
| 35 | 48 | 30 | 0.3 | 46 | 47 400 | 72 300 | 11 000 |
| 35 | 48 | 30 | 0.3 | 46 | 61 100 | 110 000 | 4 500 |
| 37 | 47 | 20 | 0.3 | 45 | 28 200 | 50 100 | 11 000 |
| 37 | 47 | 30 | 0.3 | 45 | 40 500 | 79 800 | 11 000 |
| 38 | 48 | 20 | 0.3 | 46 | 28 100 | 50 200 | 11 000 |
| 38 | 48 | 30 | 0.3 | 46 | 40 300 | 80 000 | 11 000 |
| 38 | 52 | 30 | 0.6 | 48 | 50 800 | 81 100 | 11 000 |
| 38 | 52 | 30 | 0.6 | 48 | 64 200 | 121 000 | 4 000 |
| 40 | 50 | 20 | 0.3 | 48 | 29 400 | 54 100 | 10 000 |
| 40 | 50 | 30 | 0.3 | 48 | 42 300 | 86 200 | 10 000 |
| 40 | 52 | 20 | 0.6 | 48 | 31 200 | 47 800 | 10 000 |
| 40 | 52 | 36 | 0.6 | 48 | 53 500 | 95 700 | 10 000 |
| 40 | 55 | 20 | 0.6 | 51 | 37 400 | 55 700 | 10 000 |
| 40 | 55 | 20 | 0.6 | 51 | 44 300 | 73 600 | 3 500 |
IKO TAF 324220,TAF 324230 Nots
Notes(1) Minimum allowable value of chamfer dimension r
(2) Allowable rotational speed applies to oil lubrication. For grease lubrication, a maximum of 60% of this value is allowable.
Remarks1. TAF series with a roller set bore diameter Fw of 26 mm or less have no oil hole. In others, the outer ring has an oil groove and an
oil hole.
2. No grease is prepacked. Perform proper lubrication.
