IKO MXNSL 45 C-Lube Linear Roller Way Super MX
IKO MXNSL 45 Description
| Identification number | Interchangeable | Mass (Ref.) | Dimensions of assembly mm | Dimensions of slide unit mm | Dimensions of track rail mm | Mounting bolt for track rail（3）
Bolt size×R | Basic dynamic load rating（4）
C N | Basic static load rating（4）
C0 N | Static moment rating（4） | ||||||||||||||||||||||||
| MX series | LRX series （No C-Lube） | Slide unit kg | Track rail kg/m | H | H1 | N | W1 | W2 | W3 | W4 | L1 | L2 | L3 | L4 | L5 | M1×depth（2） | Maximum fixing thread depth（2） | H3 | W | H4 | d3 | d4 | h | E | F | T0 N・m | TX N・m | TY N・m | |||||
| MXNS 30 | － | ○ | 0.70 | 5.01 | 38 | 6.5 | 16 | － | 60 | 20 | 10 | 113 | 40 | 70.4 | 121 | － | M 8× 8 | 9 | 4.5 | 28 | 28 | 9 | 14 | 12 | 40 | 80 | M 8×28 | 43 400 | 74 400 | 1 350 | 883 5 780 | 883 5 780 | |
| MXNSG 30 | － | ○ | 0.90 | 134 | 60 | 91.4 | 142 | 53 200 | 96 700 | 1 750 | 1 470 8 740 | 1 470 8 740 | |||||||||||||||||||||
| MXNSL 30 | － | － | 1.14 | 162 | 80 | 119.4 | 170 | 65 600 | 126 000 | 2 290 | 2 500 13 600 | 2 500 136 000 | |||||||||||||||||||||
| MXNS 35 | － | ○ | 1.08 | 6.88 | 44 | 6.5 | 18 | 78 | 70 | 25 | 10 | 124 | 50 | 78.6 | － | 12.7 | M 8× 9 | 11 | 11 | 34 | 32 | 9 | 14 | 12 | 40 | 80 | M 8×35 | 58 700 | 100 000 | 2 170 | 1 360 8 470 | 1 360 8 470 | |
| MXNSG 35 | － | ○ | 1.42 | 152 | 72 | 106.6 | 74 200 | 135 000 | 2 930 | 2 440 13 800 | 2 440 13 800 | ||||||||||||||||||||||
| MXNSL 35 | － | － | 1.81 | 184 | 100 | 138.6 | 90 800 | 175 000 | 3 800 | 4 060 21 300 | 4 060 21 300 | ||||||||||||||||||||||
| MXNS 45 | － | ○ | 1.84 | 10.8 | 52 | 8 | 20.5 | 94 | 86 | 30 | 13 | 154 | 60 | 99 | － | 17.5 | M10×11 | 13 | 13.5 | 45 | 38 | 14 | 20 | 17 | 52.5 | 105 | M12×40 | 95 400 | 159 000 | 4 430 | 2 700 16 800 | 2 700 16 800 | |
| MXNSG 45 | － | ○ | 2.58 | 194 | 80 | 139 | 124 000 | 223 000 | 6 200 | 5 220 29 000 | 5 220 29 000 | ||||||||||||||||||||||
| MXNSL 45 | － | － | 3.29 | 234 | 120 | 179 | 151 000 | 287 000 | 7 980 | 8 560 44 400 | 8 560 44 400 | ||||||||||||||||||||||
| MXNS 55 | － | ○ | 3.31 | 14.1 | 63 | 9 | 23.5 | 110 | 100 | 37.5 | 12.5 | 184 | 75 | 120 | － | 20 | M12×15 | 19 | 16 | 53 | 43 | 16 | 23 | 20 | 60 | 120 | M14×45 | 148 000 | 248 000 | 8 040 | 5 040 31 100 | 5 040 31 100 | |
| MXNSG 55 | － | ○ | 4.83 | 238 | 95 | 174 | 198 000 | 359 000 | 11 700 | 10 400 57 000 | 10 400 57 000 | ||||||||||||||||||||||
| MXNSL 55 | － | － | 6.28 | 292 | 150 | 228 | 244 000 | 470 000 | 15 300 | 17 700 90 700 | 17 700 90 700 | ||||||||||||||||||||||
IKO MXNSL 45 Nots
Notes （1） Track rail lengths L are shown in Table 2.1 on page Ⅱ－175 and Table 2.3 on page Ⅱ－176 .
（2） For the fixing thread depth of the slide unit mounting hole, the value indicated in Table 16.2 on page Ⅱ－190 is recommended.
The fixing thread depth of mounting screw in the middle of the way in the slide unit width direction should be less than the maximum
fixing thread depth.
（3） Track rail mounting bolts are not appended.
（4） The direction of basic dynamic load rating (C), basic static load rating (C0), and static moment rating (T0, TX, TY) are shown in the
sketches below. The upper values of TX and TY are for one slide unit and the lower values are for two slide units in close contact.
（5） The shapes of grease nipple vary by size. The specifications are shown in Table 15 on page Ⅱ－188.
Remarks 1. For size 30 series, a grease nipple mounting thread hole is provided on the right and left end plates respectively.
2. For size 35, 45, and 55 series, three grease nipple mounting thread holes are provided on the right and left end plates respectively.
However, the size of thread hole for size 35 in the slide unit travelling direction is smaller than that of the crosswise direction.
When the grease nipple is mounted along the travelling direction, contact IKO.
IKO MXNSL 45 Example of identification number of assembled set
