IKO LRXDG 12-SL C-Lube Linear Roller Way Super MX
IKO LRXDG 12-SL Description
| Identification | number | Interchangeable | Mass | (Ref.) | Dimensions of assembly mm | Dimensions of slide unit mm | Dimensions of track rail mm | Appended mounting bolt for track rail（2）
Bolt size×R | Basic dynamic load rating（3）
C N | Basic static load rating（3）
C0 N | Static moment rating（3） | ||||||||||||||||||||
| MX series | LRX series （No C-Lube） | Slide unit kg | Track rail kg/m | H | H1 | N | W2 | W3 | W4 | L1 | L2 | L3 | L4 | M1×depth | H3 | W | H4 | d3 | d4 | h | E | F | T0 N・m | TX N・m | TY N・m | ||||||
| MXD 10…SL | －
－ | 0.028 | 0.48 | 13 | 1.5 | 5 | 20 | 13 | 3.5 | 36 35 | 12 | 20.8 | － | M2.6×3 | 3 | 10 | 8 | 3.5 | 6 | 3.5 | 12.5 | 25 | M3×10 | 3 200 | 5 880 | 37.9 | 20.9 147 20.9 142 | 20.9 147 20.9 142 | |||
| LRXD 10…SL | |||||||||||||||||||||||||||||||
| MXDC 12 | ○ |
0.92 |
20 |
3 |
7.5 |
27 |
15 |
6 | 40 | 15.8 | 44 |
M4 ×4.5 |
4 |
12 |
12 |
3.5 |
6 |
4.5 |
20 |
40 |
M3×12 | 4 250 | 6 500 6 090 | 49.4 46.3 | 18.6 | 18.6 | |||||
| 196 | 196 | ||||||||||||||||||||||||||||||
| LRXDC 12 | ○ | 37 | 14.8 | 40 | 3 900 | ||||||||||||||||||||||||||
| 0.045 | － | 16.3 | 16.3 | ||||||||||||||||||||||||||||
| － | LRXDC 12…SL | ○ | 170 | 170 | |||||||||||||||||||||||||||
| MXD 12 | ○ |
0.072 | 50 | 25.4 | 53 | 6 120 |
10 400
| 79.1
| 45.8 371 | 45.8 371 | |||||||||||||||||||||
| LRXD 12 | ○ | 47 | 25.3 | 50 | 5 890 | 78.7 | 45.2 343 | 45.2 343 | |||||||||||||||||||||||
| MXD 12…SL | ○ | 50 | 25.4 | 53 | 6 120 | 79.1
| 45.8 371 | 45.8 371 | |||||||||||||||||||||||
| LRXD 12…SL | ○ | 47 | 15 | 25.3 | 50 | 5 890 | 78.7 | 45.2 343 | 45.2 343 | ||||||||||||||||||||||
| MXDG 12 | ○ | 61 | 36.6 | 64 | 8 120 | 15 000 14 600 | 114 111 | 92.7 | 92.7 | ||||||||||||||||||||||
| 628 | 628 | ||||||||||||||||||||||||||||||
| LRXDG 12 | ○ | 58 | 35.8 | 61 | 7 710 | ||||||||||||||||||||||||||
| 0.097 | 88.6 | 88.6 | |||||||||||||||||||||||||||||
| － | LRXDG 12…SL | ○ | 581 | 581 | |||||||||||||||||||||||||||
IKO LRXDG 12-SL Nots
Notes （1） Track rail lengths L are shown in Tables 2.1 and 2.2 on page Ⅱ－175 and Tables 2.3 and 2.4 on page Ⅱ－176.
（2） The appended track rail mounting bolts are hexagon socket head bolts equivalent to JIS B 1176. For stainless steel model, stainless
steel bolts are appended.
In an assembled set of MX series, track rail mounting bolts are not appended.
（3） The direction of basic dynamic load rating (C), basic static load rating (C0), and static moment rating (T0, TX, TY) are shown in the
sketches below. The upper values of TX and TY are for one slide unit and the lower values are for two slide units in close contact.
Remarks 1. The specification of oil hole is shown in Fig. 2 on page Ⅱ－188.
2. The specifications of grease nipple are shown in Table 15 on page Ⅱ－188.
3. For size 12 series, a grease nipple mounting thread hole is provided on the right and left end plates respectively.
IKO LRXDG 12-SL Example of identification number of assembled set
