MCGILL SB-22205 BEARINGS , SPHERE-ROL®Spherical roller bearings
Description
| McGILL BEARING NUMBER | SB-22205 |
| BORE A MM | 25 |
| BORE A INCH | .9843 |
| BORE A TOL. +.0000 | -.0004 |
| OUTSIDE DIAMETER B MM | 52 |
| OUTSIDE DIAMETER B INCH | 2.0472 |
| OUTSIDE DIAMETER B TOL. +.0000 | -.0005 |
| WIDTH C MM | 18 |
| WIDTH C INCH +.0000 | .7087 |
| WIDTH C TOL. +.0000 | |
| r (1) | .039 |
| SHOULDER DIMENSIONS D INCH | 1 7/32 |
| SHOULDER DIMENSIONS E INCH | 1 13/16 |
| H (2) INCH | 5/32 |
| J MIN. INCH | 3/32 |
| LIM. SPEED (3) RPM | 9000 |
| ABMA BASIC DYNAMIC RATING POUNDS | 8100 |
| ADAPTER NUMBER (4) | SNW 05 |
| ADAPTER DIMENSIONS SHAFT DIAM d | 3/4 |
| ADAPTER DIMENSIONS B 1 INCH | 1 17/64 |
| ADAPTER DIMENSIONS S INCH | 29/64 |
| ADAPTER DIMENSIONS D 1 INCH | 1 9/16 |
| (5) BRG. WT. LBS. | .40 |
| McGILL BEARING NUMBER |
BORE | OUTSIDE DIAMETER |
WIDTH C |
r (1) |
SHOULDER DIMENSIONS |
H (2) |
J MIN. |
LIM. SPEED (3) RPM |
ABMA BASIC DYNAMIC RATING POUNDS |
ADAPTER NUMBER (4) |
ADAPTER DIMENSIONS | (5) BRG. WT. LBS. |
||||||||||||||||||||||||||
| A | B | D | E | SHAFT DIAM. |
B 1 | S | D 1 | |||||||||||||||||||||||||||||||
| MM | INCH | TOL. +.0000 |
MM | INCH | TOL. +.0000 |
MM | INCH +.0000 |
TOL. +.0000 |
INCH | INCH | INCH | INCH | d | INCH | INCH | INCH | ||||||||||||||||||||||
| SB-22202 | 15 | .5906 | -.0003 | 35 | 1.3780 | 14 | .5512 | .024 | 23/32 | 1 3/16 | 3/32 | 3/32 | 14000 | 3900 | – | – | – | – | – | .15 | ||||||||||||||||||
| SB-22203 | 17 | .6693 | 40 | 1.5748 | 16 | .6299 | .024 | 15/16 | 1 3/8 | 1/8 | 3/32 | 13000 | 5000 | – | – | – | – | – | .20 | |||||||||||||||||||
| SB-22204 | 20 | .7874 | 47 | 1.8504 | 18 | .7087 | .039 | 1 | 1 5/8 | 1/8 | 3/32 | 11000 | 7000 | – | – | – | – | – | .32 | |||||||||||||||||||
| SB-22205 | 25 | .9843 | -.0004 | 52 | 2.0472 | -.0005 | 18 | .7087 | .039 | 1 7/32 | 1 13/16 | 5/32 | 3/32 | 9000 | 8100 | SNW 05 | 3/4 | 1 17/64 | 29/64 | 1 9/16 | .40 | |||||||||||||||||
| SB-22206 | 30 | 1.1811 | 62 | 2.4409 | 20 | .7874 | -.0050 | .039 | 1 7/16 | 2 3/16 | 5/32 | 3/32 | 8100 | 11500 | SNW 06 | 15/16 | 1 23/64 | 29/64 | 1 3/4 | .64 | ||||||||||||||||||
| SB-22207 | 35 | 1.3780 | 72 | 2.8346 | 23 | .9055 | .039 | 1 5/8 | 2 7/16 | 11/64 | 3/32 | 6800 | 15100 | SNW 07 | 1 3/16 | 1 29/64 | 31/64 | 2 1/16 | .95 | |||||||||||||||||||
| SB-22208 | 40 | 1.5748 | -.0005 | 80 | 3.1496 | 23 | .9055 | .039 | 1 7/8 | 2 3/4 | 11/64 | 3/32 | 6000 | 16800 | SNW 08 | 1 5/16 | 1 1/2 | 1/2 | 2 1/4 | 1.20 | ||||||||||||||||||
| SB-22209 | 45 | 1.7717 | 85 | 3.3465 | 23 | .9055 | .039 | 2 1/16 | 2 15/16 | 11/64 | 3/32 | 5600 | 17800 | SNW 09 | 1 7/16 | 1 37/64 | 1/2 | 2 17/32 | 1.30 | |||||||||||||||||||
| SB-22210 | 50 | 1.9685 | 90 | 3.5433 | 23 | .9055 | .039 | 2 1/4 | 3 1/8 | 11/64 | 3/32 | 5250 | 18700 | SNW 10 | 1 11/16 | 1 49/64 | 9/16 | 2 11/16 | 1.40 | |||||||||||||||||||
| SB-22211 | 55 | 2.1654 | 100 | 3.9370 | -.0006 | 25 | .9843 | .059 | 2 1/2 | 3 1/2 | 11/64 | 3/32 | 4650 | 23000 | SNW 11 | 1 15/16 | 1 27/32 | 9/16 | 2 31/32 | 1.90 | ||||||||||||||||||
| SB-22212 | 60 | 2.3622 | 110 | 4.3307 | 28 | 1.1024 | .059 | 2 3/4 | 3 7/8 | 11/64 | 3/32 | 4200 | 29200 | – | – | – | – | – | 2.60 | |||||||||||||||||||
| SB-22213 | 65 | 2.5591 | -.0006 | 120 | 4.7244 | 31 | 1.2205 | -.0060 | .059 | 2 15/16 | 4 3/16 | 3/16 | 1/8 | 3800 | 35500 | SNW 13 | 2 3/16 | 2 7/64 | 5/8 | 3 3/8 | 3.40 | |||||||||||||||||
| †SB-22214 | 70 | 2.7559 | 125 | 4.9213 | 31 | 1.2205 | .059 | 3 1/8 | 4 7/16 | 3/16 | 1/8 | 3650 | 35900 | – | – | – | – | – | 3.60 | |||||||||||||||||||
| SB-22215 | 75 | 2.9528 | 130 | 5.1181 | 0008 | 31 | 1.2205 | .059 | 3 5/16 | 4 5/8 | 3/16 | 1/8 | 3500 | 37600 | SNW 15 | 2 7/16 | 2 19/64 | 43/64 | 3 7/8 | 3.90 | ||||||||||||||||||
| SB-22216 | 80 | 3.1496 | 140 | 5.5118 | 33 | 1.2992 | .079 | 3 9/16 | 4 15/16 | 7/32 | 1/8 | 3250 | 42400 | SNW 16 | 2 11/16 | 2 3/8 | 43/64 | 4 5/32 | 4.60 | |||||||||||||||||||
| SB-22217 | 85 | 3.3465 | 150 | 5.9055 | 36 | 1.4173 | .079 | 3 3/4 | 5 5/16 | 7/32 | 1/8 | 3000 | 50900 | SNW 17 | 2 15/16 | 2 31/64 | 45/64 | 4 13/32 | 5.90 | |||||||||||||||||||
| SB-22218 | 90 | 3.5433 | 160 | 6.2992 | 40 | 1.5748 | .079 | 3 15/16 | 5 11/16 | 7/32 | 1/8 | 2800 | 59200 | SNW 18 | 3 3/16 | 2 41/64 | 25/32 | 4 21/32 | 7.50 | |||||||||||||||||||
| SB-22219 | 95 | 3.7402 | 170 | 6.6929 | -.0010 | 43 | 1.6929 | 0080 | .079 | 4 3/16 | 6 1/16 | 21/64 | 1/8 | 2650 | 70900 | – | – | – | – | – | 9.20 | |||||||||||||||||
| SB-22220 | 100 | 3.9370 | -.0008 | 180 | 7.0866 | 46 | 1.8110 | – . |
.079 | 4 7/16 | 6 3/8 | 21/64 | 1/8 | 2500 | 77700 | SNW 20 | 3 7/16 | 2 7/8 | 27/32 | 5 3/16 | 11.10 | |||||||||||||||||
| SB-22222 | 110 | 4.3307 | 200 | 7.8740 | 53 | 2.0866 | .079 | 4 7/8 | 7 1/8 | 21/64 | 1/8 | 2200 | 100000 | SNW 22 | 3 15/16 | 3 13/64 | 29/32 | 5 23/32 | 15.90 | |||||||||||||||||||
| SB-22224 | 120 | 4.7244 | 215 | 8.4646 | -.0012 | 58 | 2.2835 | .079 | 5 5/16 | 7 11/16 | 7/16 | 3/16 | 2050 | 120000 | SNW 24 | 4 3/16 | 3 15/32 | 15/16 | 6 1/8 | 19.80 | ||||||||||||||||||
| SB-22226 | 130 | 5.1181 | 230 | 9.0551 | 64 | 2.5197 | .098 | 5 7/8 | 8 5/16 | 7/16 | 3/16 | 1900 | 132500 | SNW 26 | 4 7/16 | 3 49/64 | 1 | 6 3/4 | 24.80 | |||||||||||||||||||
| SB-22228 | 140 | 5.5118 | -.0010 | 250 | 9.8425 | 68 | 2.6772 | -.0100 | .098 | 6 1/4 | 9 1/16 | 7/16 | 3/16 | 1750 | 159100 | SNW 28 | 4 15/16 | 3 63/64 | 1 1/16 | 7 3/32 | 31.30 | |||||||||||||||||
| SB-22230 | 150 | 5.9055 | 270 | 10.6299 | -.0014 | 73 | 2.8740 | .098 | 6 11/16 | 9 11/16 | 35/64 | 3/16 | 1600 | 169300 | SNW 30 | 5 3/16 | 4 15/64 | 1 1/8 | 7 11/16 | 39.50 | ||||||||||||||||||
MCGILL SB-22205 Bearing points for attention :
1. "Not available from stock. Consult McGill Customer Service for availability.
r = maximum fillet radius for shaft and housing."
2. "All sizes supplied withouterring relubrication feature (-W33) unless otherwise specified. Consult McGill Customer Service for availability of non-W33.
Refers to oil lubrication and moderate load. For grease lubrication, use 1/2 of value shown."
3.
4. "Complete adapter number indicates adapter sleeve, locknut and lock washer (Example — Adapter Number SNW 07 indicates sleeve S-07, locknut N-07 and lock washer W-07.)
Sizes SB-22202 through SB-22211 and SB-22214 and SB-22215, standard ABMA locknuts and lockwashers will not clear LAMBDA seal I.D. unless 1/16"" thick spacer is used between face of"
5. "bearing and washer (or locknut).
Does not include adapter assembly."
6. "Add suffix ""K"" to indicate tapered bore bearing.
Add suffix ""-W22"" for selected O.D."
7.
8. to indicate seal on large bore side. For high temp. seals, use "TS", "TSS" or "TSL", and high temp. grease.
9. "For LAMBDA® seals, add suffix ""YS"" to bearing number for single sealand ""YSS"" for double seals. For tapered bore bearings, single LAMBDA® sealed, add suffix ""YS"" to indicate
seal on small bore side and ""YSL"" to indicate seal on large bore side."
10. For expansion-type bearing, add suffix "E" to catalog number immediately after diametral clearance specifications.
